Wideband Analog Distribution Amplifier Model PA-6000-100
-
Compatible with PatchAmp Frames
-
True 75 Impedance
-
5 Outputs
-
Individual EQ on each output
Technical Specifications:
Input: Video Input Level: 1Vp-p nominal Max. Input Level: 2.5Vp-p centered at OV Input Impedance: 75 bridging or HIZ Coupling: A.C or D.C. Input Return Loss: >40dB to 5 MHz Common Mode: 10 Vp-p Common Mode Rejection Ratio: > 40dB to 10kHz Outputs: Number of Outputs: 5 Connector: PCB Edge Launch BNC Impedance:75 Return Loss: >40dB to 5MHz Phase Match Between Outputs: < +/- 0.2° at 3.58MHz Output Isolation: >35dB at 5MHz Response Variation: < 0.1dB, 1 to 5 loads at 5 MHz Performance: Gain Range: +/- 3dB Frequency Response: < +/- 0.05dB to 5MHz +/- 0.2dB at 20MHz > -3dB at 120MHz typically Differential Gain (10-90% APL): < 0.15% Differential Phase (10-90% APL): < 0.15% Line Window Tilt: < 0.20% Field Rate Window Tilt: < 0.20% S/N: > 70dB Hum: < 1 mVp-p Propagation Delay: 15 +/- 1.0 nS
Applications: Analog Video Analog High Definition RF Indicators:
Signal present Equalization: Range: 250 ft Belden 1694A cable Response: < +/- 0.05 dB to 5 MHz < +/- 0.15 dB to 10MHz Power System: Input Voltage: +48 V dc Power Dissipation: < 3 Watts Hot Swappable: Yes (True hot swappable power before signal) External Power Supply: AC Input: Universal Volts: 100-240 AC Frequency: 47-63 Hz Redundant: Yes (N+1) Hot Swappable: Yes Temperature: Performance: 5 - 40° Operating: 0 - 50°